Western NDE & Engineering Ltd..............................

 Home Up Feedback Contents

A802M Layer Gauge
A802M Layer Gauge A802S Layer Gauge A2002M Coating Gauge A2002S Coating Gauge Special Order Gauges

If you would like more information about this or any other products  please

Send us E-mail

Search this site for:

A802M Layer Thickness Gauge Key Benefits

Small size and weight
Metric and imperial units direct read-out

The A802M is a microprocessor based instrument designed for a quick and accurate coating thickness measurements. The non-conductive layer thickness (such as thermal insulation, coatings, etc.) can be measured on the both magnetic and non-magnetic material substrates. The measurement can be taken on curved and flat surfaces. The A802M is equipped with the internal memory which automatically stores the calibration data so no recalibration is required when turning the unit "ON" after a period of the non-use.
The A802M set consists of the gauge with its probe, calibration standards, high grade re-chargeable battery and convenient carrying case
.

Instrument Features

direct readout in both millimeters and mils
small weight and size
sealed push-buttons keypad
can be used for the magnetic and non-magnetic substrates
calibration stored in the non-volatile memory
automatic power off after 3 mm.
low battery display
powered from a standard size battery

Technical Specifications

Measuring Ranges
from 0 to 20 mm or 0 to 999 mils (0.999")
Resolution
0.01mm or 1 mil (0.001")
Types of selected substrate
magnetic materials such as steel, etc. non-magnetic materials such as brass, copper, etc.
Connectors
standard "Lemo" type
Calibration
standard manufacturer or the user calibrations
Internal Memory
for storing calibration results
Battery
standard 9 V, 6LF22 alkaline or re-chargeable. Or 9 V DC power supply
Operating Temp.
from 0 to +45 deg. C
Dimensions
150 x 80 x 30 mm (5.9" x .31" x 1.2")
Weight
0.4 kg. (0.9 Ib)

Home ] Up ]

Copyright © 1999 Western NDE & Engineering Ltd.
Last modified: November 01, 1999